PRODUCTS
PA6 fiber masterbatch
PA6 fiber masterbatch is one of Fiber masterbatch,It good thermal stability,good resistance to migration,good gloss and good dispersion.
Classification:
Product Introduction
PA6 masterbatch is made of Fiber GradeTtanium Dioxide and high quality PA raw material developed by the basic carrier,adding imported additives through twin screw mixing and granulating whitening particles.We can produce different contenst products according to different requirements of customers.It has good thermal stability,good resistance to migration,good gloss and good dispersion.
Product Index
ITEM |
INDEX |
|
Heterogeneous masterbatchcontent(Mass Fraction) (%) |
≤ 0.40 |
|
100 grain weight (g/100g) |
≤ M₁ª±0.20 |
|
Powdercontent(Mass Fraction) (%) |
0.20 |
|
Intrinsic viscosity (dL/g) |
M₂ᵇ±0.05 |
|
Pressure filtration difference(DFvalue) (MPa) |
≤ 2.0 |
|
Melting point (℃) |
M₃ ͨ ±4.0 |
|
Moisture content (%) |
≤ 0.1 |
|
Batch difference of fiber coloring |
△E(CMC2:1) |
≤ 1.0 |
(gray card)/grade |
≥ 4 - 5 |
M1 is the center value of 100grain weight which selected from 2.00G~ 3.50g and it shall be determined by the supplier and the demander through negotiation.Once determined,it shall not be changed arbitranily.
M2 is the center value of intrinsic viscosity which selected from 0170 DL/G~0.900 DL/ g and it shall be determined by the suoplier and the demander through neqotiation.Once determined it,shall not be changed arbitranily.
M3 is the center value of melting pointwhich is selected at 185.0℃~ 260.0C and it shall be determined by the supplier and the demander through negotiation.Once determined,it shail not be changed arbitrarily.
The delivery inspection adoptsvisual method to judge the batch diference grade,and instrument method to test ΔE during arbitration. The batch difference of lightgray light brown,military green and other colors shall be determined by the supplier and the buyer through negotiation.
Keyword:
PA6 masterbatch
Fiber masterbatch
Related Products
DY-458 is an environmentally friendly solvent, used as a heat carrier, battery foaming agent, and an additive to remove dust or non-condensable gases, etc.
DY263 Instead of 3M Novec 2702/04
DY263 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components.
DY631/DY633 Instead of 3M egc-1702/1700
DY631/DY633 Electrical Grade Coating is a lower solids version of DY Electronic Grade Coating.
Online inquiry